Countertop lift system, Manual adjustable, Manulift 6380HA, 4.1" front

Countertop lift system, Manual adjustable, Manulift 6380HA, 4.1" front

Accessories

Alu-Fronts 4.06
Alu-Front, 11.8" - Drawer 30cm pcs
Alu-Front, 15.7" - Drawer 40cm pcs
Alu-Front, 19.7" - Drawer 50cm pcs
Alu-Front, 23.6" - Drawer 60cm pcs
Alu-Front, 31.5" - Drawer 80cm pcs
Fitting kit for cover panels (Baselift / Manulift)
Fitting kit for cover panels
- Baselift & Manulift
pcs
Hose cover to Baselift / Manulift
Hose cover for Baselift / Manulift pcs
Drawer, Baselift / Manulift
Drawer, 11.8" width - 30cm pcs
Drawer, 15.7" width - 40cm pcs
Drawer, 19.7" width - 50cm pcs
Drawer, 23.6" width - 60cm pcs
Drawer, 31.5" width - 80cm pcs
Drawer - Push-to-open
Drawer Push-to-open, 11.8" width - 30cm pcs
Drawer Push-to-open, 15.7" width - 40cm pcs
Drawer Push-to-open, 19.7" width - 50cm pcs
Drawer Push-to-open, 23.6" width - 60cm pcs
Drawer Push-to-open, 31.5" width - 80cm pcs
Cutlery compartment
Cutlery compartment, 11.8" width - 30cm pcs
Cutlery compartment, 15.7" width - 40cm pcs
Cutlery compartment, 19.7" width - 50cm pcs
Cutlery compartment, 23.6" width - 60cm pcs
Cutlery compartment, 31.5" width - 80cm pcs
Inset Kitchen Sink Stainless Steel ES10 - 17.4
Inset Kitchen Sink stainless Steel ES10 - 17.4"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES11 - 19.5
Inset Kitchen Sink stainless Steel ES11 - 19.5"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES12 - 21.3
Inset Kitchen Sink stainless Steel ES12 - 21.3"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES15 - 30.2
Inset Kitchen Sink stainless Steel ES15 - 30.2"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES20 - 24.3
Inset Kitchen Sink Stainless Steel ES20 - 24.3"
- Incl. flexible plumbing kit
pcs
Wheelchair Accessible Inset Kitchen Sink ES25 - 38.2
Inset Kitchen Sink Stainless Steel ES25 - 38.2"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES30 - 30.2
Inset Kitchen Sink Stainless Steel ES30 - 30.2"
- Incl. flexible plumbing kit
pcs
Inset Kitchen Sink Stainless Steel ES35 - 47.5
Inset Kitchen Sink Stainless Steel ES35 - 47.5"
- Incl. flexible plumbing kit
pcs
Flexible drain hose
Flexible drain hose pcs
Two-compartment frame, ALU-Design
Two-compartment frame, ALU-Design pcs
Three-compartment frame, ALU-Design
Three-compartment frame, ALU-Design pcs
Protective panel under worktop lift
Protective panel under worktop lift 23.6" pcs
Protective panel under worktop lift 27.6" pcs
Protective panel under worktop lift 31.5" pcs
Protective panel under worktop lift 39.4" pcs
Mini cabinet on wheels
Mini cabinet on wheels with drawer and inner drawer, fully extendable with soft-close pcs
Mini cabinet on wheels with waste sorting and inner drawer, fully extendable with soft-close
Mini cabinet on wheels with waste sorting and inner drawer, fully extendable with soft-close pcs

Your configuration

Description  
MANULIFT 6380HA - 30"
   
(According Machinery Directive 2006/42/EG, Annexe 2A)
Front height 4.06" (103 mm)
Plumbing connections Connection is made with flexible hoses
Height adjustment

Manually adjustable by 300 mm in intervals of 1" (25 mm)
27.6" - 39.4" (700-1000 mm) excl. top board

A built-in gas spring facilitates height adjustment:
Pull out the locking pin, adjust the height with the help of the gas spring. Lock the position with the locking pin.

Max load 220 lb (100 kg)
Frame depth 22"-23.2" (560-590 mm) from wall
Dimensions cover plates

2 pcs, width = width of the lift -0.4" (-10 mm), height 17.2" (438 mm), 
thickness 0.5"-0.8" (12-20 mm)

Width worktop Width = width of the lift
Depth worktop 0.6" (15 mm) shallower than worktops on fixed cabinets
Space to wall / adjoining cabinet 0.2" (5 mm)
Space to wall (for tiles) 0.6" (15 mm)
Tiling From 27.6" (700 mm) above floor (alternatively all the way down to the floor)
Delivery modules

Ready-mounted worktop incl. wall-mounted brackets

Material

Aluminium frame

Warranty 3 years warranty
Granberg makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.