Wall Mounted Manual Adjustable Combi Kitchen 6380-ES20S4

Combi Kitchen Module Manulift 6380-ES20S4

Wall-mounted, manual adjustment
ES20 inset sink under-glued in worktop

Combi Kitchen Module Manulift 6380-ES20S4

Wall Mounted Manual Adjustable Combi Kitchen 6380-ES20S4

Dimensions - Wall Mounted Manual Adjustable Combi Kitchen 6380-ES20S4

Select model

Lift Width

Planning Width

Accessories


465H-030	Drawer, 11.8" width - 30cm	pcs
465H-040	Drawer, 15.7" width - 40cm	pcs
465H-050	Drawer, 19.7" width - 50cm	pcs
465H-060	Drawer, 23.6" width - 60cm	pcs
465H-080	Drawer, 31.5" width - 80cm	pcs

466H-030	Drawer Push-to-open, 11.8" width - 30cm	pcs
466H-040	Drawer Push-to-open, 15.7" width - 40cm	pcs
466H-050	Drawer Push-to-open, 19.7" width - 50cm	pcs
466H-060	Drawer Push-to-open, 23.6" width - 60cm	pcs
466H-080	Drawer Push-to-open, 31.5" width - 80cm	pcs

463-030	Cutlery compartment, 11.8" width - 30cm	pcs
463-040	Cutlery compartment, 15.7" width - 40cm	pcs
463-050	Cutlery compartment, 19.7" width - 50cm	pcs
463-060	Cutlery compartment, 23.6" width - 60cm	pcs
463-080	Cutlery compartment, 31.5" width - 80cm	pcs


61352	Two-compartment frame, ALU-Design	pcs

770-040-01	Mini cabinet on wheels with drawer and inner drawer, fully extendable with soft-close	pcs

771-040-01	Mini cabinet on wheels with waste sorting and inner drawer, fully extendable with soft-close	pcs

Your configuration

Item.no

Description

Quantity

6380-ES20S4L-219

Combi kitchen module 6380-ES20S4, Left incl. top board with 1+1/2 sink bowl. Prepared for hob with 4 cooking zones, width 86.2" (219 cm)

Content of the module:

- 1.00 pcs MANULIFT 6380HA - 86.2"

- 1.00 pcs 4.1" (103 mm) Alu-Front, 86.2"

- 1.00 pcs Fitting kit for cover panels

- 1.00 pcs Cover panels, Worktop lifts, 23.2" - 94.5"

- 2.19 m Top board - Laminate / Compact-laminate, 17.7"-24.0" depth

- 2.19 m Rear edge trim ALU for worktop (per meter)

- 1.00 pcs Inset Kitchen Sink Stainless Steel ES20 - 24.3"

- 1.00 pcs Built-under stainless steel sink

- 1.00 pcs Granberg mixer tap 60210 Incl. dishwasher shut off

- 1.00 pcs Flexible water hoses 2-pack, 3/8, length 19.7" ** Not available in this region **

- 1.00 pcs Cooktop - 60 cm ** Not available in this region **

pcs

Wall mounted, Manually Height Adjustable Combi Kitchen Module - 6380-ES20S4. The module contains one shallow sink bowl, one shallow rinsing bowl. Prepared for glass ceramic hob with four cooking zones.

The module is available in left or right version.

The modules have a 0.4" (10 mm) shorter width to automatically give 0.2" (5 mm) gap on either side of the unit for the up and down movement. They are also 0.6" (15 mm) shallower in depth to make room for splash protection/tiles.

The module can be integrated into environments from any kitchen manufacturer.

Functions and Advantages

11.8" (30 cm) height adjustment
Adjustable depth 22.7"-23.9" (576-606 mm) incl. front
Tiltable worktop plane for adjustment

Installation	Wall
Front height	4.1" (103 mm)
Height adjustment	Manually adjustable by 11.8" (300 mm) in intervals of 1.0" (25 mm) 27.6"-39.4" (700-1000 mm) excl. top board A built-in gas spring facilitates height adjustment: Pull out the locking pin, adjust the height with the help of the gas spring. Lock the position with the locking pin.
Max load	220 lb (100 kg)
Delivery modules	Ready-mounted worktop incl. wall-mounted brackets
Frame depth	22.7"-23.9" (576-606 mm) from wall (Incl. front)
Material	Frame: Aluminum Cover panels for covering installations under the worktop: 0.5" (12 mm) white melamine. Several colours can be offered upon request. Fronts: White lacquered aluminum. Several colours can be offered upon request. Top board: 1.2" (30 mm) worktop in high pressure laminate. Post-shaped front edge. Several colours can be offered upon request.
Plumbing connections	Connection is made with flexible hoses
Space to wall / adjoining cabinet	0.2" (5 mm)
Space to wall (for tiles)	0.6" (15 mm)
Tiling	From 27.6" (700 mm) above floor (alternatively all the way down to the floor)
Warranty	3 years warranty Granberg makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.